Product Description

Briefing of FW****0VI computer control filament winding machine
1. Introduction
The machine is adopting the advanced wet winding process, the appearance and the properties have been improved significantly. It applied industrial computer from Advantech of Taiwan. While the parameter of the product, the computer can perform the linearity design automatically, later control the trolley make the reciprocating movement, lay up the fiberglass immersed by resin on the finished liner regularly. The structure is reasonable and fashionable design, operation easily, reasonable interface between the operators and machine. The machine has been exported to Philippines, Indonesia, Vietnam, and other countries.
2. Technical parameter
2.1 The total power: *0 kW
2.2 The range of diameter can be wound: DN **0 ~ DN ***0mm
2.3 The range of length: 1.****2m
2.4 The height of main shaft: 2.3m
2.5 The max output of roving: **0m/min
2.6 The width of roving sheet: **8mm
2.7 The winding angle: *0°***0°
3. The components
3.1 Stock head
3.1.1 One set of planet balance reducer with variable frequency timing motor.
3.1.2 Detecting structure connected with computer control system and main shaft
3.1.3 Gearbox (match with three transmission shaft suitable for winding speed ratio)
3.1.4 Connection dial erected in transmission shaft connecting with coupling
3.1.5 Framework of stock head and protective casing.
3.1.6 Steel ladder for check out and maintenance connected with the top of stock head.
3.2 Trolley
3.2.1 Framework of trolley
3.2.2 Resin tray and resin squeeze device.
3.2.3 Roving guide with adjusting wheel which can adjust its location.
3.3 Trolley platform
3.3.1 Planet balance reducer direct linked with servo motor.
3.3.2 Guide track embedded on the two sides of the bed for the running of the trolley.
3.3.3 Bed body protected by the steel casing.
3.3.4 Chain supporting tray with abrasion resistant material.
3.3.5 Chain adjusting device erected on the stock tail.
3.3.6 Chain and gear which drive trolley reciprocating movement.
3.3.7 Framework of trolley platform.
3.3.8 Ladder connected with trolley platform.
3.3.9 Protective cover of trolley transmission device.
3.4 A pair of mandrel A type support
   3.4.1 Support made by carbon steel, the bearing seat and flange which connecting with coupling are set on the top.
   3.4.2 The bottom has matched running wheel.
3.5 Rotating ring
   3.5.1 Bottom rotating ring.
   3.5.2 Top rotating ring
3.6 Roving output device
   3.6.1 Tensioner
   3.6.2 Support plate
   3.6.3 Removable support with four wheels.
   3.6.4 Roving bracket for hanging roving.
3.7 Resin mix system
   3.7.1 Trough for mixing resin.
   3.7.2 Motor and blade for mixing resin.
3.7.3 Resin pump and spraying system
3.8 Distribution box
   3.8.1 Frequency converter for main shaft timing
   3.8.2 Servo driver for trolley timing
   3.8.3 Advanced PC for controlling linearity
   3.8.4 Display
   3.8.5 Auxiliary electric device
3.9 Accessory equipment
   3.9.1 Assembly ring with tensioner (one specification preferred by the client)
   3.9.2 Support roller
3.*0 Mould
   3.*0.1 Dia.***0mm Flat head mold 1set
   3.*0.2 Dia.***0mm elliptical head mold 1set
4. Key elements
4.1 Industrial computer: made in Taiwan, China
4.2 Frequency converters¼Œ Servo motor ¼ŒOptical Encoder¼šSiemens
4.3 Planet balance reducer: Hongtai Group Jiangsu in China.
4.4 Electrical elements from CHNT, People Electricity and Delixi Group